Not only are we having a baby, but our best friends Shannon and Dom are having one less than a month before us! Yaaay, you get two nurseries for the price of one in a way 🙂 So this weekend we headed over to their house to help them install a chair rail in their nursery. We’ve only done one chair rail install ourselves and that was in our entryway a few months ago, but we were more than willing to help them out. Our entryway was actually more complicated and larger than their room, so the process was pretty simple this time around.

We were the brains, the boys offered the brawn.

Very important to this process this time around was our brand new nail gun. We picked up this small pneumatic nail gun while it was on sale at Lowe’s a couple of months ago. We paid about $75 for it (which I think we put some of on a gift card) and it was worth every penny. The compresser was nice and small, light and not very loud at all.

We knew this was a smart investment because we have plenty of other molding plans up our sleeves (including our own nursery) and our previous nail gun was electric. It weighed a ton and wasn’t powerful enough to shoot the nails all the way through the molding, so we had to go back and hammer them in. Not only does this thing fully sink in nails, the compresser can be used to inflate tires. Who knew? 🙂

The rest of the process we pretty much explained in our entryway post. Please excuse the inconsistently weird colors in these pics, they were taken at night.

We didn’t caulk or paint it, but at least you can see all of our cuts and nail holes 🙂

We also got a chance to add my favorite little part of a chair rail to this room… the end pieces. We once again just glued them on (I wasn’t putting my finger on that small piece of molding and shooting it in!) and held them in place with some tape while they dried. We didn’t have any painter’s tape on hand, so plain ol’ Scotch it was!

They haven’t done anything else to the room yet (it’s not staying yellow), but the uncaulked, unpainted chair rail already makes such a difference!

Mike and I looove all sorts of molding and we don’t mind installing it either. Painting is another topic for Mike, he hates painting. With our new nail gun, we’re looking forward to finishing up our entryway, molding out the baby’s room and making some built-in things. Hopefully we can start planning all of that soon because our new flooring has been delivered and is set to be installed next week! 🙂

Please excuse the iPhone picture, but this is literally the third time since we’ve lived here (which has only been a year and a half) that we’ve had boxes of flooring in our living room. Okay twice was because we wanted it, once was the builder’s fault, but hopefully this is it for us and we can get to decorating some new rooms! 🙂

ps- As I was searching through my old chair rail posts, I re-read this one from July 11th when we painted the bottom half of our entryway wall. It also happened to be the day we found out Darwin has cancer, so reading it nearly broke my heart all over again. BUT, in a happy way. Everything written that day, that he lost even more weight, that he had lost more than 75% of his kidney function, has been reversed. As of Sunday, Darwin finally broke into the 7lb range (7lbs 3oz at that!) and has begun to regain some of his muscle mass. I felt sick on Sunday so when he came back from the vet with Mike and happily trotted over to me on the couch, I was the proudest momma in the whole world 🙂

This weekend, we tackled part 2 of our molding project. Mike got to write about our adventures in the hallway last Monday, so now it’s my turn 🙂

First, some before pictures. Okay, they’re partial before pictures since if you look closely, you can see that the chair rail is already installed upstairs. This started so suddenly last weekend that I didn’t think to take true before pictures.

View from the front door (with it open..brr)

A better view of the upstairs.

And the staircase angle that drove us insane.

Going into this week, we already had a whole 2 hours of experience in installing chair rail. We knew downstairs included mostly 45 degree cuts, but several things made us nervous.

1) that above the staircase angle

2) this pre-existing molding that we needed to remove in order to connect the old and new chair rails

3) that fancy end piece finishing off that exposed edge of chair rail above

Originally, when we started this project last weekend, we were going to get the chair rail up in the hallway just so that we could start our gallery wall. But when we had so much fun with the saw and nail gun, we decided to finish up all of the molding.

We started by prying off that one piece of pre-existing molding. At one point, Mike suggested we just start the new moldings on the opposite side of the wall.

But I thought that despite the fact that we had never done this before, we should do it right and connect the pieces along that small wall. So we crossed our fingers and hoped that it would come off clean.

Thankfully, it did! 🙂

We began to install the chair rail from this point by measuring, measuring, leveling, leveling and cutting 45 degree angles. The bottom of our chair rail is 33.5 inches from the floor, so we just marked off this measurement every foot or so around the room, then lined the chair rail up on the dots and leveled it. I didn’t take many in-progress pictures because my hands were full most of the time 🙂

We used our same crappy electric nail gun, which once again didn’t shoot the nails all the way through the molding. So we used a hammer and screwdriver method to drive them fully in.

Here’s our little wall all dressed up, before caulk.

We’re so glad we decided to do that little wall. It’s my favorite part of the project now!

Our second beast was the stairway angle. Once again, I didn’t take any in-progress pictures, probably because it would have just been images of Mike and I staring at each other. But here it is once we finally got it up there.

We decided to keep the height of this chair rail consistent with the other areas, which was 33.5 inches from the floor to the bottom of the rail. We debated whether to line it up with the railing, but decided to keep the measurement. It’s pretty close to being in line with the railing anyway! I measured 33.5 inches from the bottom of the baseboard, in several places, then connected them with a pencil line.

I wish I could tell you how we calculated the angle of the stairs, but it was really a lucky guess. It bothered me that we guessed by looking at the baseboard cuts, then tried it out on some scrap pieces and just so happened to have guessed correctly. In an effort to learn the proper way to do this, I found this article. According to this guy, our method was exactly right! I felt all guilty like I cheated on a geometry test or something…no, I’m not a nerd…

We disagreed about how the end of this piece angled piece should be cut. We ended up going with my suggestion of keeping the cut consistent with the other end pieces. Mike thought that this would look funny because it would not meet the railing at the same angle- there would be more open space at the bottom then there would be at the top. But I figured that once the bottom half of the wall is painted white, that part wouldn’t be noticeable. I was more considered about the funny pattern that would result from cutting this particular rail at a different angle.

Finally, we tackled the super scary end pieces. They were the easiest thing ever. Ever. I don’t know why they scared us. In fact, we had loads of scraps around and didn’t even have to cut some of them. They just required a 45 degree cut, then the other side was a straight cut from the point where the 45 degree angle ended. Here’s a piece.

We actually attached these with Gorilla glue, since our nail gun isn’t the best and these pieces are small.

We really couldn’t believe how easy these were to install, yet they add such a pretty effect!

Finally, yesterday morning we caulked. I have never caulked before in my life, but we managed to get the entire downstairs finished. We still have some work to do upstairs, since we have to do the baseboards up there from the hardwood floors we had installed this past fall. All it took was a quick line of caulk, a wipe with my finger, then a few wipes with a wet cloth to get any excess off of the walls.

Tada! Here are some pictures of our finished (but not painted) chair rail!

I think to say I love how this is turning out would be an understatement. I cannot wait for next Saturday to paint the trim and the lower half of the wall a glossy white, then eventually add the boxes underneath, then down the road add the gallery of pictures I’ve been dreaming of.

So, is it Saturday yet??

ps- I’m linking this post up to How To’sday at The Lettered Cottage and Thrifty Decor Chick’s Before & After Party!

Rebecca and I have always loved molding in a home. Whether it was crown molding, large baseboard molding or bead-board wainscoting, we were in love with it. For me, there was something about the clean lines it presented and the overall framing of the room. It is a great finishing touch that can ultimately transform a room.

We always talked about doing our own molding, but it was something we were scared to do ourselves. How do we do the corners, how do we make the cuts, will I cut my hand off using the power saw — all scary questions that ran through my head. We previously had a friend of the family install some molding in our formal living room.  Our plan was to eventually bring the molding into our foyer area, up the stairs, and the upstairs hallway.

So when I told Rebecca earlier in the week that I had an itch to do a chair rail, she kind of shrugged me off thinking it was just another molding conversation that would soon pass.

But when we woke up Saturday morning, we began passing along ideas to accomplish during the day since we both felt somewhat motivated.  Rebecca mentioned hanging some curtains and I mentioned the chair rail.  We decided to start with the upstairs hallway since it would be the easiest in terms of straight cuts and easy angles.  We made some measurements and a couple minutes later, we were on our way to Lowe’s to pick up some molding.

Here is the view looking down the hallway and into our master bedroom.  The plan here is to put up a chair rail and then eventually do boxes; similar to our living room in the picture above.

Everything is pretty straight so cutting+nailing would be pretty straight forward.  This was so until we got to an angle at the top of our stairs.

We struggled with this for maybe a half hour or so.  We could not figure out how to make this cut.  We tried several different cuts, holding them up and trying to determine how to do this.  We went back and forth a bit before I went downstairs to draw the angle on paper and try to calculate some numbers.  And just when I was about to lose my patience, Rebecca figured it out.  We made two cuts with some scrap, one angle at 20 degrees and the other at 25 degrees.  We held the pieces together and sure enough, we were golden.

A few more finishing cuts later, and we were finished.

So what did I learn with this experience?

• We waited just about a year to do this project because we were scared.  We were scared for absolutely no reason.
• Invest in a nail gun with a compressor.  We used an electric nail gun and half our nails barely went completely in.  We had to hammer a lot of them flat with the surface.
• Take your time.  Measure twice, cut once.  Or if you have scrap pieces, make some cuts as an example and work from there.
• The molding area at Lowe’s isn’t scary nor overwhelming.

I categorized this post as inexpensive design because this was an incredibly cheap project to accomplish — especially compared to what we would have paid a contractor.   All said and done, 40 linear feet of molding and some tubes of caulk ran us just under $100.  An absolute steal.